topic High RX Drop on standby firewall unit in Firewall and Security Management

High RX Drop on standby firewall unit

LeeBingKang — Mon, 17 Oct 2022 07:53:04 GMT

Dear all,

Recently, i have a question which would like to seek for your all suggestion: What cause a R80.40 standby firewall RX drop increasing on one of its interface (this interface is normal interface).

Meanwhile, I appreciate for your effort on sharing your sugggestion on this.

Thank you.

Re: High RX Drop on standby firewall unit

Chris_Atkinson — Mon, 17 Oct 2022 08:54:51 GMT

Have you reviewed sk166424 are the same counters on the Active member not incrementing or zero?

What model of appliance, is it a 10G port?

Re: High RX Drop on standby firewall unit

LeeBingKang — Mon, 17 Oct 2022 09:04:20 GMT

Hi Chris,

Appreciate for your reply on my post.

The RX drop on the Active member also increasing and there are same version (R80.40)

Meanwhile, there CheckPoint 6400 and the port which has the RX drop issue is normal ethernet interface (1G).

Re: High RX Drop on standby firewall unit

Chris_Atkinson — Mon, 17 Oct 2022 09:44:00 GMT

If after reading the SK above you remain concerned share the output here or with TAC for further analysis.