topic Re: HealthCheck Result WARNING in Firewall and Security Management

HealthCheck Result WARNING

Victor_Ugwu1 — Wed, 13 Feb 2019 22:52:13 GMT

@Please can someone help in explaining the meaning of this WARNINGS!!! in HealthCheck result I need this urgently Please

Re: HealthCheck Result WARNING

PhoneBoy — Thu, 14 Feb 2019 00:25:07 GMT

Without seeing the actual stats in question, I am left to guess.

But most likely:

CPU User -- A significant percentage of CPU being used by user processes. You can use "top" to begin troubleshooting this.
F2F and SecureXL -- Most likely SecureXL is disabled and/or most of your traffic is not being accelerated.
fwaccel stats -s will tell the tale.
PXL Packets -- fwaccel stats -s will also tell us about PXL.

Re: HealthCheck Result WARNING

HristoGrigorov — Thu, 14 Feb 2019 04:57:20 GMT

Post also 'fwaccel stat' to see if acceleration is disabled early in the chain from some rule.

Re: HealthCheck Result WARNING

Victor_Ugwu1 — Thu, 14 Feb 2019 06:57:16 GMT

CPU User- - How then can i tackle the high CPU utilization by this user processes?
F2F Warning -- SecureXL is enable and acceleration is on. What then can be the problem?
PXL - please see attached information on the PXL . What can be the issue?attached information on the PXL

Re: HealthCheck Result WARNING

PhoneBoy — Thu, 14 Feb 2019 16:08:45 GMT

Depends on what the process is, which you haven't provided.

It may require a TAC case to get to the bottom of.

The PXL/SecureXL stuff can be explained if you provide the full output of the commands we've already asked for.

Re: HealthCheck Result WARNING

Nathan_Davieau — Fri, 22 Feb 2019 19:22:27 GMT

There will be a Summary section below the provided output which will provide further details on the warning along with an SK where possible. Can we please get the full health check output?