topic Re: Replacing/Upgrade cluster members in Firewall and Security Management

Replacing/Upgrade cluster members

AdaCoul — Mon, 22 Aug 2022 12:16:00 GMT

Hello team,

We are planning to replace all Appliances (Managements and Gateways) by new ones in our environnement.

Currently, we have 2x Smart-1 405 in a cluster and 2x 5400 also in a cluster; fourth Appliances are on R80.40.

We need to replace the former appliances by new ones as below :

- 2x Smart-1 405 in a cluster on R80.40 by 2x Smart-1 600 in a cluster on R81

- 2x 5400 in a cluster on R80.40 by 2x 5900 in a cluster on R81

What is the best and easiest way to accomplish this.

Thanks for assistance.

Regards

Re: Replacing/Upgrade cluster members

G_W_Albrecht — Mon, 22 Aug 2022 12:27:38 GMT

I would suggest to upgrade to R81.10 instead !

Re: Replacing/Upgrade cluster members

Kryten — Mon, 22 Aug 2022 12:41:35 GMT

I am currently in a similar Situation. I have to replace a Cluster of 2x5100 appliances running on R80.30 with 2x6200 appliances which will be upgraded to R81.10 beforehand. Management has already been upgraded to R81.10.

So far I found this CheckMates Thread:
https://community.checkpoint.com/t5/Security-Gateways/Replace-Upgrade-Cluster/td-p/69216

This gives a good example on what has to be done it seems.
I am still somwhat new to Check Point and have never done this kind of replacement before, so I want to prepare as good as I can before the replacement.

I hope that helps a bit, I will watch this Thread in case there are more useful infos out there 🙂

Re: Replacing/Upgrade cluster members

AdaCoul — Mon, 22 Aug 2022 13:17:14 GMT

Hi @G_W_Albrecht

Good suggestion.

I note that we have to upgrade the four new appliances to R81.10 before. So what's the best and easiest way to put have the same configs (Gaia config and database) from the former management and Gateways to the new ones.

Re: Replacing/Upgrade cluster members

AdaCoul — Mon, 22 Aug 2022 13:20:45 GMT

Hi @Kryten

Thanks for the provided threat.

I can just noticed that Management Replacing/upgrading to new appliances is not mentioned in this thread.

Re: Replacing/Upgrade cluster members

G_W_Albrecht — Mon, 22 Aug 2022 13:23:39 GMT

See R81.10 Installation and Upgrade Guide and https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solut...