topic Re: VSX Cluster R81.10 | Status of Virtual Systems is "Active!" and "Down in Firewall and Security Management

VSX Cluster R81.10 | Status of Virtual Systems is "Active!" and "Down"

lucaslight — Sun, 03 Apr 2022 03:20:22 GMT

Hi All,

Recently I have deployed a VSX Cluster with VSLS version R81.10 in my lab.

I created 2 VSs and found that the status of the VS is "Active!" and "Down" as follows:-

I also deployed R80.40 VSX Cluster but it didn't have this issue. As follows:-

How to troubleshoot this?

Thanks.

Re: VSX Cluster R81.10 | Status of Virtual Systems is "Active!" and "Down

Chris_Atkinson — Sun, 03 Apr 2022 06:46:03 GMT

Was a JHF applied to either environment or was this just the base image?

Re: VSX Cluster R81.10 | Status of Virtual Systems is "Active!" and "Down

lucaslight — Sun, 03 Apr 2022 08:39:14 GMT

R81.10 with latest JHF30.

Re: VSX Cluster R81.10 | Status of Virtual Systems is "Active!" and "Down

Chris_Atkinson — Mon, 04 Apr 2022 09:23:38 GMT

Has policy been installed to all the virtual-systems including VS0 etc?

Could you please provide some additional outputs such as:

cphaprob state
cphaprob -i list
cphaprob -a if
vsx stat -v
cphaconf show_bond BOND_NAME

Re: VSX Cluster R81.10 | Status of Virtual Systems is "Active!" and "Down

lucaslight — Mon, 04 Apr 2022 16:29:16 GMT

Hi Chris,

Yes, the policy has been installed to all vs as well as vs0:-

[Expert@VSX-GW01:0]# cphaprob -i list

There are no pnotes in problem state

[Expert@VSX-GW01:0]#
[Expert@VSX-GW01:0]# cphaprob -a if

vsid 0:
------
CCP mode: Manual (Unicast)
Required interfaces: 2
Required secured interfaces: 1

Interface Name: Status:

Mgmt UP
bond8 (S-LS) UP

S - sync, LM - link monitor, HA/LS - bond type

Virtual cluster interfaces: 1

Mgmt 10.0.3.113

[Expert@VSX-GW01:0]# cphaprob show_bond

Legend:
-------
UP! - Bond interface state is UP, yet attention is required
Slaves configured - number of slave interfaces configured on the bond
Slaves link up - number of operational slaves
Slaves required - minimal number of operational slaves required for bond to be UP

[Expert@VSX-GW01:0]# vsenv 1
Context is set to Virtual Device CIMB-VSX-GW01_Tier1 (ID 1).
[Expert@VSX-GW01:1]#
[Expert@VSX-GW01:1]# cphaprob show_bond

[Expert@VSX-GW01:1]# cphaprob show_bond bond12

Bond name: bond12
Bond mode: Load Sharing
Bond status: DOWN

Balancing mode: 802.3ad Layer2 Load Balancing
Configured slave interfaces: 2
In use slave interfaces: 0
Required slave interfaces: 1

Slave name | Status | Link
----------------+-----------------+-------
g▒▒s▒▒▒▒▒x▒▒▒@▒▒s▒▒▒y▒d▒ | Active | No

Thanks.

Re: VSX Cluster R81.10 | Status of Virtual Systems is "Active!" and "Down

lucaslight — Mon, 04 Apr 2022 16:48:19 GMT

Hi Chris,

Is it because link is down cause the status is down?

Thanks.

Re: VSX Cluster R81.10 | Status of Virtual Systems is "Active!" and "Down

Chris_Atkinson — Tue, 05 Apr 2022 00:58:38 GMT

Most likely yes, some of the other commands will provide more meaningful output when run from the specific VS context.

topic Re: VSX Cluster R81.10 | Status of Virtual Systems is &quot;Active!&quot; and &quot;Down in Firewall and Security Management

VSX Cluster R81.10 | Status of Virtual Systems is "Active!" and "Down"

Re: VSX Cluster R81.10 | Status of Virtual Systems is "Active!" and "Down

Re: VSX Cluster R81.10 | Status of Virtual Systems is "Active!" and "Down

Re: VSX Cluster R81.10 | Status of Virtual Systems is "Active!" and "Down

Re: VSX Cluster R81.10 | Status of Virtual Systems is "Active!" and "Down

Re: VSX Cluster R81.10 | Status of Virtual Systems is "Active!" and "Down

Re: VSX Cluster R81.10 | Status of Virtual Systems is "Active!" and "Down

topic Re: VSX Cluster R81.10 | Status of Virtual Systems is "Active!" and "Down in Firewall and Security Management