topic Re: Failed to get table status for connections with "fw tab -t connections -s" command in Firewall and Security Management

Failed to get table status for connections with "fw tab -t connections -s" command

LeeBingKang — Fri, 11 Mar 2022 06:39:39 GMT

Dear all,

Recently, i faced an issue whereby failed to get the connection table on the standby firewall as picture:

Furthermore, the firewall is a standby unit, appliance 6200, R80.40 jumbo hotfix 94

Meanwhile, i also tried to find any SK or community post regarding to this issue but failed. Hence, I appreciate if someone able to point the possible cause and any impact on this issue.

Thank you.

Re: Failed to get table status for connections with "fw tab -t connections -s" command

G_W_Albrecht — Fri, 11 Mar 2022 08:14:03 GMT

What happens if you try fw tab -t connections -s instead of fw tab -t connetions -s

Missing a little C 8)

Re: Failed to get table status for connections with "fw tab -t connections -s" command

LeeBingKang — Fri, 11 Mar 2022 08:32:53 GMT

Ah, thanks for your remind on the missing keyword.

Re: Failed to get table status for connections with "fw tab -t connections -s" command

G_W_Albrecht — Fri, 11 Mar 2022 08:48:05 GMT

Miss-spelled keyword 8)

Re: Failed to get table status for connections with "fw tab -t connections -s" command

Timothy_Hall — Sat, 12 Mar 2022 02:03:28 GMT

Also consider using fw ctl conntab which was somewhat recently documented and is a bit more human readable.