topic Re: vsx upgrade with non-DMI in Firewall and Security Management

vsx upgrade with non-DMI

Maller — Mon, 21 Feb 2022 12:22:13 GMT

Hello I tried to do a CPuse upgrade of a VSX cluster but I got this message after installer verify : "Result: R80.40 Gaia Fresh Install and upgrade Clean Install: Installation is allowed. Upgrade: Upgrade a VSX with Non-DMI configuration is not supported." As I understand , now I'm forced to do a clean install on these gateways but I've some questions , after "upgrade clean install" - snapshots will survive , right? - At the end of process , some configuration remains in gw ? - If so , this remaining config can cause issues when vsx_util reconfigure ? It should be removed? - Is there some documentation with samples using vsx_util reconfigure command? thanks

Re: vsx upgrade with non-DMI

Bob_Zimmerman — Mon, 21 Feb 2022 22:14:28 GMT

Snapshots survive an 'installer clean-install <whatever>', because that does not affect the filesystem on the storage. Snapshots do not survive a real clean install with ISOmorphic.

My understanding is 'installer clean-install <whatever>' only leaves the IP address and mask of whichever interface you have selected as the management interface, and maybe the password of the user 'admin'. I don't personally trust anything but a real clean install for VSX upgrades, but 'installer clean-install' is probably fine. Just remember to build your bonds before you try to reconfigure.

Re: vsx upgrade with non-DMI

Maller — Fri, 25 Feb 2022 10:58:36 GMT

Let me ask you this question.... this non-dmi vsx deployment is being managed via VSW through a WRP0 interface

When gw is clean install upgraded , Will I be able to configure by console this interface and assign ip to be managed?

thanks

Re: vsx upgrade with non-DMI

Bob_Zimmerman — Fri, 25 Feb 2022 14:29:30 GMT

How in the world did you manage to build that? I don't know of any way to have a wrp interface before you have SIC with the management server.

Re: vsx upgrade with non-DMI

Maller — Fri, 25 Feb 2022 15:17:14 GMT

yes , that's my doubt. This VSX is managed by MDS via wrp interface . In a clean install upgraded gateway , which interface should be configured in order to communicate with MDS before to execute vsx_util reconfigure?

I don't see this step and I have no lab to test it......