topic Re: AD Query Status - 2 show Connection Timed Out in Firewall and Security Management

AD Query Status - 2 show Connection Timed Out

seanmc12 — Tue, 14 Dec 2021 20:41:38 GMT

I have an HA configuration and have 3 Domain Controllers setup for Identity Awareness. All are at the same location, same creds, same version, but 2 of the 3 show "Connection Timed Out" in my AD Query Status. Can anyone explain why or how that works. Newbie and don't understand it fully.

Re: AD Query Status - 2 show Connection Timed Out

PhoneBoy — Thu, 16 Dec 2021 23:55:13 GMT

Version/JHF level?
And why AD Query and not Identity Collector?

Re: AD Query Status - 2 show Connection Timed Out

seanmc12 — Fri, 17 Dec 2021 00:54:42 GMT

Running R80.40 JHF 91. I was just looking under device and License information, and under device status,

Is says AD Query Status and 2 of the controller show timed out.

Re: AD Query Status - 2 show Connection Timed Out

mcatanzaro — Fri, 17 Dec 2021 01:33:16 GMT

Hi,

What does the following command show from the gateway: ‘# adlog a dc’?

Also, I would run through steps 1-4 in the following SK to rule out anything obvious: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk113747&t=1639699597552