topic Re: installation error on VM ware workstation in Firewall and Security Management

installation error on VM ware workstation

SriniKrish — Thu, 28 Oct 2021 08:44:55 GMT

Hello,

I am seeing the attached error while installing CP on VMware workstation.

The error occurs at 99% progress of Software blades installation.

Version R80.40.

I believe this is due to the inodes which I've seen cause policy installation issues, but wondering how can I clear that during installation. The install aborts and prompts to reboot to start again.

there is enough space in the drive that its being installed.

Appreciate any directions here.

Thank you !

Srini

Re: installation error on VM ware workstation

Tal_Paz-Fridman — Thu, 28 Oct 2021 09:17:46 GMT

Are you using ISOmorphic Tool?

Please look at:

sk122014 Errors during Gaia fresh-install using a bootable USB created with ISOmorphic Tool:

https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewservicerequestdetails=&servicerequestid=6-0002111226

Re: installation error on VM ware workstation

SriniKrish — Thu, 28 Oct 2021 11:00:13 GMT

Hello,

Thank you for your reply,

Nope I was installing it from the Hard drive. I wasn't using any USB. Is it a necessity to use USB ? can't the ISO be hosted in the drive itself ?

And the link doesn't in the reply doesn't show any thing apart from "Error encountered processing a template."

Thanks

Srini

Re: installation error on VM ware workstation

Chris_Atkinson — Thu, 28 Oct 2021 13:22:22 GMT

Can you share more details of the VM setup please?

Re: installation error on VM ware workstation

Timothy_Hall — Thu, 28 Oct 2021 14:34:28 GMT

Can guarantee you selected a disk for your VM that is smaller than 40GB. With the standard partitioning 40GB disk along with 4GB RAM is the absolute minimum. Anything less than 40GB and space runs out right where you are having the issue, found this out over the years running an Authorized Training Center with lots of VM instances for student lab workstations...please review the Open Server Hardware Requirements in the R80.40 release notes which calls for a 110GB disk. We seem to get these type of threads every so often because people ignore the published requirements, skimp on VM resources, and then complain they are having a problem.

Re: installation error on VM ware workstation

sharonab — Thu, 28 Oct 2021 14:41:34 GMT

99% you are right , there is also a small chance that he is working with thin provisioning and the esx is overutlized so balloning wiil fail , and he will not have enough space even if his disk is larger .

Re: installation error on VM ware workstation

SriniKrish — Mon, 01 Nov 2021 05:15:41 GMT

Hi Guys,

Thank you for your response, much appreciated !

It was indeed a space issue but the suprising thing is during installation if I try to allocate more space to the root (which was 7GB around 15% default) it wouldn't let me change. Isntead it had almost 36% allocated to backup. which was weird.

More to the puzzle was the entire partition utilization was 50% but I was still getting this flag.

I did assign more space and it was all fine.

Thanks again !

best regards

Srini