topic Re: How do I add SecureGateway to Cisco ISE 2.4 using RADIUS? in Firewall and Security Management

How do I add SecureGateway to Cisco ISE 2.4 using RADIUS?

John_Ejaife — Fri, 07 Sep 2018 00:05:40 GMT

I'm having trouble adding a Checkpoint firewall to ISE 2.4. I've been following a blog where the author claims to have successfully added it to ISE 2.1, (here http://mdtnets.blogspot.com/2016/07/checkpoint-gaia-radius-authentication.html).

In the part where he gets to "Authentication Policy" I assume it's been replaced by Policy Sets. Running into trouble setting up the conditional "If DEVICE:Device Type Equals Device Type#All Device Types#Checkpoint"

I can do the"if DEVICE:Device Type Equals: All Device Types" but am not given an option for any other parameters. Am I missing something here?

Re: How do I add SecureGateway to Cisco ISE 2.4 using RADIUS?

G_W_Albrecht — Fri, 07 Sep 2018 09:53:42 GMT

I think you ask questions concerning Cisco Configuration - but all i know is sk105542...

Re: How do I add SecureGateway to Cisco ISE 2.4 using RADIUS?

Nüüül — Mon, 10 Sep 2018 08:49:47 GMT

Hi,

Device Type "checkpoint" is not there by default. This has to be configured manually. (Out of the head Administration -> Network Resources)

More or less you only enter the IP Address of the Firewall and are then able to differentiate, who is sending the request.

Cisco Identity Services Engine Administrator Guide, Release 2.4 - Manage Network Devices [Cisco Identity Services Engin…

Daniel

Re: How do I add SecureGateway to Cisco ISE 2.4 using RADIUS?

John_Fleming — Wed, 21 Nov 2018 15:15:05 GMT

John Ejaife (of Spikefish Solutions fame) just wrote up a complete walk through on this. This covers Cisco ISE 2.4 and shows creating a admin role and a noc role. Access is controlled via group membership in active directory.

Checkpoint + ISE + Active Directory integration

Re: How do I add SecureGateway to Cisco ISE 2.4 using RADIUS?

PhoneBoy — Thu, 22 Nov 2018 05:33:28 GMT

I probably should have moved this thread into Appliances and Gaia‌ awhile ago

Re: How do I add SecureGateway to Cisco ISE 2.4 using RADIUS?

Enyi_Ajoku — Wed, 18 Sep 2019 20:36:40 GMT

Will this be the same steps on vsx. Particular for the NOC

Just asking as Web Access is disabled when VSX is enabled