topic Error mesage when attempting to add two static route in Gaia r 77.30 in Firewall and Security Management

Error mesage when attempting to add two static route in Gaia r 77.30

jomof — Tue, 18 May 2021 18:37:22 GMT

I am trying to use the following two statemets in checkpoint gaia

set static-route 192.168.1.92/26 nexthop gateway address 192.168.42.185 priority 1 on

set static-route 192.168.1.92/26 nexthop gateway address 192.168.42.195 priority 4 on

set static-route 192.168.1.92/26 ping on

I am getting to create the first statement in Checkpint Gaia R77.30 gui but when I am attempting to create the second route the firewall is displaying the following error

Can anyone please assist.

Regards

Re: Error mesage when attempting to add two static route in Gaia r 77.30

PhoneBoy — Tue, 18 May 2021 18:47:40 GMT

Assuming this is a bug, R77.30 is End of Support.
If installing the last JHF doesn’t resolve this issue, you will need to upgrade to a supported release.

Re: Error mesage when attempting to add two static route in Gaia r 77.30

Baasanjargal_Ts — Wed, 19 May 2021 03:12:31 GMT

Hello jomof,

You need to add just one route for this subnet with two gateways with different priorities instead creating two separate routes. Try to configure same as below image.

Re: Error mesage when attempting to add two static route in Gaia r 77.30

jomof — Wed, 19 May 2021 15:04:17 GMT

Hello Baasanjargal,

That work I was able to add the second gateway successfully with the suggest priority in my post I ask about using the ping on feature, would this work with this method?

The other I am unsure how this priority works it it the one with highest number the preferred path?

Regard

Re: Error mesage when attempting to add two static route in Gaia r 77.30

PhoneBoy — Wed, 19 May 2021 15:23:19 GMT

Priority 1 is highest priority, and I believe ping will work with both routes.

Re: Error mesage when attempting to add two static route in Gaia r 77.30

Baasanjargal_Ts — Wed, 19 May 2021 23:46:14 GMT

Hello jomof,

You can check your route with the traceroute command.