topic Change gateway routes in Firewall and Security Management

Change gateway routes

yishaia — Wed, 28 Apr 2021 04:52:19 GMT

Hello,

I need to change route destination on multi static routes,

i want to leave the comment that i added before,

and just replace the destination to a new one.

current destination 10.30.30.1 - new destination 10.30.30.254

how can i replace it by script to all routes, and not change/delete one by one?

example :

192.168.78.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.197.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.195.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.50.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.194.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.73.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.49.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.193.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.72.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.48.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.192.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.47.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.223.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.222.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.84.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.220.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.83.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.43.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.82.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.42.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.81.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.41.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.40.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.39.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.215.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.38.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.37.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.213.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.36.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.35.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.210.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.33.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.209.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022
192.168.208.0 10.30.30.1 255.255.255.0 UGD 0 0 0 eth1-01.1022

Re: Change gateway routes

_Val_ — Wed, 28 Apr 2021 07:50:24 GMT

Why not putting clish config to a text file? Then it is replace/copy/paste operation

Re: Change gateway routes

yishaia — Wed, 28 Apr 2021 08:31:05 GMT

Hello,

I want to keep the comments,

will it keep it?

Re: Change gateway routes

abihsot__ — Wed, 28 Apr 2021 12:00:00 GMT

execute "show configuration" and you will get something like this:

set static-route x.x.x.x/24 comment test
set static-route x.x.x.x/24 nexthop gateway address y.y.y.y priority 1 on

you can use those commands to change comments and gateways if needed.

Re: Change gateway routes

yishaia — Sun, 30 May 2021 04:16:07 GMT

Hello,

thanks,

I did :

clish -c "show configuration" |grep "static" > /var/my_config.txt

and edit the file to the new routes.

I want to make the .txt file to a .sh script and run it,

and not to change the routes with copy&paste.

how can I do it?

thanks

Re: Change gateway routes

yishaia — Mon, 07 Jun 2021 13:15:26 GMT

hi,

anyone knows how to do it?

thanks

Re: Change gateway routes

_Val_ — Mon, 07 Jun 2021 14:36:38 GMT

Why do you need a script? CLISH does not allow scripted execution. You either need invoke GAIA API or add clish -c "......" for each entry in your .txt file.

Either way is much more complex than copy/paste we suggested already.

Re: Change gateway routes

yishaia — Mon, 07 Jun 2021 14:44:07 GMT

thanks,

but there is 700 lines,

when I copy&paste it into putty some of the lines do not paste complete.

and there is missing letters, so the command of some routes incomplete.

what can I do about it?

thanks

Re: Change gateway routes

_Val_ — Mon, 07 Jun 2021 15:55:24 GMT

Why would you need to have 700 static routes on a FW? You may want to re-think your network design, I am afraid...