https://community.checkpoint.com/t5/Firewall-and-Security-Management/R80-40-VSX-Issues-with-routed/m-p/114173#M15958 <P>Everything in R80.40 Take 94, VSX + SMS.</P><P>It seems I keep on hitting issues with the routed process in R80.40 and VSX. I already reported here an issue when routing would stop for few minutes then start again, then I recently had a couple of other issues.</P><P>First, a route would start getting dropped by anti-spoofing when nothing changed routing-wise, even the accept and subsequent drop logs show the same inbound interface for the flow. Removing and re-entering the static route solved the issue.</P><P>Recently, I had dhcp relay on some interfaces which stopped working apparently randomly. VSLS the affected VS solves the issue.</P><P>There are entries in /var/log/routed_messages_vs.&lt;x&gt; and I have a case open, I wonder if others have encountered a similar issue?</P><P>It's a new setup so no chance for leftovers of previous versions. Clean install and restoration in VSX cluster didn't help either.</P> Sun, 21 Mar 2021 19:37:54 GMT Alex- 2021-03-21T19:37:54Z https://community.checkpoint.com/t5/Firewall-and-Security-Management/R80-40-VSX-Issues-with-routed/m-p/114173#M15958 <P>Everything in R80.40 Take 94, VSX + SMS.</P><P>It seems I keep on hitting issues with the routed process in R80.40 and VSX. I already reported here an issue when routing would stop for few minutes then start again, then I recently had a couple of other issues.</P><P>First, a route would start getting dropped by anti-spoofing when nothing changed routing-wise, even the accept and subsequent drop logs show the same inbound interface for the flow. Removing and re-entering the static route solved the issue.</P><P>Recently, I had dhcp relay on some interfaces which stopped working apparently randomly. VSLS the affected VS solves the issue.</P><P>There are entries in /var/log/routed_messages_vs.&lt;x&gt; and I have a case open, I wonder if others have encountered a similar issue?</P><P>It's a new setup so no chance for leftovers of previous versions. Clean install and restoration in VSX cluster didn't help either.</P> Sun, 21 Mar 2021 19:37:54 GMT https://community.checkpoint.com/t5/Firewall-and-Security-Management/R80-40-VSX-Issues-with-routed/m-p/114173#M15958 Alex- 2021-03-21T19:37:54Z https://community.checkpoint.com/t5/Firewall-and-Security-Management/R80-40-VSX-Issues-with-routed/m-p/127205#M18438 <P>Hi Alex,</P><P>Any progress on this matter? We experienced the same in T102. We upgraded from R80.20 T118 to R80.40 T120 VSLS. We have opened a TAC case to investigate these issues. At the time of issues we were not able to troubleshoot any further because of business impact but we saw a lot of routeD messages and OSPF was not working.</P><P>Regards,</P><P>Lesley</P> Tue, 17 Aug 2021 12:25:51 GMT https://community.checkpoint.com/t5/Firewall-and-Security-Management/R80-40-VSX-Issues-with-routed/m-p/127205#M18438 Wille010 2021-08-17T12:25:51Z