topic RAID errors appear in /var/log/messages false positive? in Firewall and Security Management

RAID errors appear in /var/log/messages false positive?

Geomix7 — Wed, 03 Feb 2021 10:13:57 GMT

Hello all ,

I run a health check on an appliance 5100 (R80.30) and receive "Raid Hardware recognition failed, Hardware is missing/not supported" message detected.
For more information, refer to sk91903.

By run the provided commands in the SK i received the below output:

1.[Expert]# dmidecode | grep -i raid
OPROM - RST - RAID

2.[Expert]# cat /proc/mdstat
Personalities :
unused devices: <none>

I am trying to find out if this appliance has a raid controller or not but even by reading the datasheet I cannot find anything.

Does anyone know?

Thanks

Re: RAID errors appear in /var/log/messages false positive?

Juan_ — Wed, 03 Feb 2021 12:47:27 GMT

Hey,

Just disable the SNMP trap

sk119264

set snmp traps trap raidVolumeState disable

Re: RAID errors appear in /var/log/messages false positive?

Chris_Atkinson — Wed, 03 Feb 2021 12:51:22 GMT

The appliance only has a single disk hence RAID is not supported / relevant.