cpview -t no longer working since upgrading to R80.30 from R77.30

scottikon — Thu, 03 Oct 2019 11:29:29 GMT

Has anyone else had any difficulties using cpview -t <timestamp>?

With R77.30 we could issue cpview -t 30.0.2019 10:00:00 for example and it would show me the historical cpview data starting that the time and date issued.

Since upgrading to R80.30 this no longer works and just displaying the help output. I can issue cpview -t and it will go to the oldest date and I have to scroll through to get to the date I want. Can be quite cumbersome.

Thanks

Re: cpview -t no longer working since upgrading to R80.30 from R77.30

Maarten_Sjouw — Thu, 03 Oct 2019 15:22:28 GMT

this is the difference in cpiew --help
On R77.30 jumbo 292:
Usage: cpview [ [-t [<timestamp>]] | [-c <conf_file>] | [-p] ] | [-b [-t <sec> [-i <count>] [-j] [-l <filesize>] ] | [-s]] | [history [on] | [off] | [stat]]
-t Show history content. Show oldest available content, or from a given <timestamp>
<timestamp> format: [Jan..Dec] [01..31] [4-digit Year] [hh:mm:ss]
-c Loads configuration from <conf_file>
-p Prints all cpview data
-b Print batch statistics data
-t In the background, data is dumped into logs. Time interval is <sec> seconds before the new dump info is generated. The value of <sec> must be greater than 30. The log is saved to var/log/cpview
-i Limit dump info to <count> times
-j Compresses the generated logs after you run cpview -b -s to stop the instance
-l Change log file size limit to <filesize>MB (default: 1024MB)
-s Stops "cpview -b" instance that runs in the background
history Controls the history daemon
on Starts the history daemon
off Stops the history daemon
stat Check whether history daemon is activated
export Export the history database

This is on R80.30 (no jumbo)
CPView:
-h [ --help ] Display this help and exit
-t [ --history ] History mode
-s [ --services ] arg on - Turn on CPView Services
off - Turn off CPView Services
stat - Show stat
export - Export the DB

Just to be sure I also checked a R80.20 take 91:
Usage: cpview [ [-t [<timestamp>]] | [-c <conf_file>] | [-p] ] | [-b [-t <sec> [-i <count>] [-j] [-l <filesize>] ] | [-s]] | [history [on] | [off] | [stat]]
-t Show history content. Show oldest available content, or from a given <timestamp>
<timestamp> format: [Jan..Dec] [01..31] [4-digit Year] [hh:mm:ss]
-c Loads configuration from <conf_file>
-p Prints all cpview data
-b Print batch statistics data
-t Show history content. Show oldest available content, or from a given <timestamp>
-i Limit dump info to <count> times
-j Compresses the generated logs after you run cpview -b -s to stop the instance
-l Change log file size limit to <filesize>MB (default: 1024MB)
-s Stops "cpview -b" instance that runs in the background
history Controls the history daemon
on Starts the history daemon
off Stops the history daemon
stat Check whether history daemon is activated
export Export the history database

Looks like R80.30 lost some functionality, jumbo 19 also shows the minimal version like shown above, I don't have a R80.30 with jumbo 50 yet.

Re: cpview -t no longer working since upgrading to R80.30 from R77.30

Adam_Zidiker — Thu, 03 Oct 2019 17:29:24 GMT

Hey

CPView had a major uplift in R80.30, and as part of it we removed old problematic flags
You can still jump to specific timestamp inside 'cpview -t', just press t and enter a timestamp
This way you don't need to exit CPView every time you want to jump to new timestamp
This functionality wasn't changed since R77

Thanks

Re: cpview -t no longer working since upgrading to R80.30 from R77.30

scottikon — Fri, 04 Oct 2019 08:32:20 GMT

Thanks Adam, has saved me a lot of time having to scroll through. All we need now is someone to update the cpview guide 🙂

Thanks again.

topic Re: cpview -t <timestamp> no longer working since upgrading to R80.30 from R77.30 in Firewall and Security Management

cpview -t no longer working since upgrading to R80.30 from R77.30

Re: cpview -t no longer working since upgrading to R80.30 from R77.30

Re: cpview -t no longer working since upgrading to R80.30 from R77.30

Re: cpview -t no longer working since upgrading to R80.30 from R77.30