https://community.checkpoint.com/t5/Firewall-and-Security-Management/Updating-ISP-Redundancy-Settings/m-p/70141#M11834 <P>Hi all. We're changing our backup ISP provider and I want to double check the process for updating the settings on the firewall. I've had a look at the ISP redundancy document and it seems like a simple change from old IP to the new and obviously the physical cable change between the new router to the external switch.</P><P>As this is my first time doing this, I just want to see if there will be any less obvious issues. Thanks in advance.</P> Wed, 11 Dec 2019 16:09:03 GMT Wyman 2019-12-11T16:09:03Z https://community.checkpoint.com/t5/Firewall-and-Security-Management/Updating-ISP-Redundancy-Settings/m-p/70141#M11834 <P>Hi all. We're changing our backup ISP provider and I want to double check the process for updating the settings on the firewall. I've had a look at the ISP redundancy document and it seems like a simple change from old IP to the new and obviously the physical cable change between the new router to the external switch.</P><P>As this is my first time doing this, I just want to see if there will be any less obvious issues. Thanks in advance.</P> Wed, 11 Dec 2019 16:09:03 GMT https://community.checkpoint.com/t5/Firewall-and-Security-Management/Updating-ISP-Redundancy-Settings/m-p/70141#M11834 Wyman 2019-12-11T16:09:03Z