topic Re: Error when I synchronized peer on my standalone cluster in Firewall and Security Management

Error when I synchronized peer on my standalone cluster

Vince60 — Thu, 17 Sep 2020 15:55:18 GMT

Hello,

I am encountering a problem with my standalone cluster (2*3600 Security Appliance). First Time Wizerd was OK, Cluster Wizard OK and Policy OK. My ClusterXL works well, but the SMS doesn't work on my Secondary appliance. When I try to peering, I have an issue : "Synchronization error : No license".

Each appliance has a local CPAP-SG3600 license for its own IP Address on GW and Management.

License status is OK for both appliances...

Do you have some ideas ? Maybe is not possible in this case ?

Thanks in advance.

Vince.

Re: Error when I synchronized peer on my standalone cluster

MartinTzvetanov — Fri, 18 Sep 2020 07:20:13 GMT

I believe the second device should have *-HA license on it

Re: Error when I synchronized peer on my standalone cluster

PhoneBoy — Sun, 20 Sep 2020 21:54:23 GMT

Actually an -HA license is not required and are being phased out.
Output of cplic print on both appliances would be helpful.

Re: Error when I synchronized peer on my standalone cluster

Vince60 — Fri, 25 Sep 2020 07:41:22 GMT

Thanks for your replies.

I'll send you the cplic print output as soon as possible.