topic Re: Failed to Install R80 in Firewall and Security Management

Failed to Install R80

Mohan_Lal — Sun, 19 Feb 2017 15:50:50 GMT

Hi all,

I have tried to install R-80 on open server. Installation was completed but I was stuck in first time configuration wizard. when I access the gaya on browser to complete first time configuration wizard it was not completed. it was stuck on 90 %. tried many times but getting same result. any one have any idea why I m stuck here.

Regards,

Mohan lal

8826699734

Re: Failed to Install R80

Timothy_Hall — Sun, 19 Feb 2017 16:08:46 GMT

It is normal to sit at 90% for quite a while during the R80 postinstall wizard but it should eventually finish. Unless you have at least 4 cores and 8GB of RAM on that server though it can take a LONG time, and anything with 2 cores or less and/or 4GB RAM or less is not a good idea for R80 Management.

My book "Max Power: Check Point Firewall Performance Optimization"

now available via http://maxpowerfirewalls.com.

Re: Failed to Install R80

Mohan_Lal — Sun, 19 Feb 2017 16:15:05 GMT

Hi Tim Hall,

Thanks for your quick response. I have tried with 4 GB Ram and 2 core CPU. tomorrow I will try with 4 core CPU and 8 GB RAM.

Regards,

Mohan lal

Re: Failed to Install R80

Yuri_Slobodyany — Tue, 07 Mar 2017 16:10:24 GMT

I played with various settings of memory and CPUs/cores the very minimal on VmWare Workstation Intel i7 is to give it 1 CPU with 4 cores and 4Gb of memory, otherwise First Time Configuration Wizard fails after being stuck on 90% in Configuring ... and you cannot connect with SmartConsole getting the error "Server is initializing .."

Physical servers are usually much bigger today so no issues there.

Re: Failed to Install R80

RickLin — Sat, 11 Mar 2017 03:25:19 GMT

Yes, You have to wait. Please have patience.

Do try to press F5 when run the FTW.

Please remember:

In R80 age.

More memory and better performance!

Re: Failed to Install R80

Eyal_Balla — Mon, 13 Mar 2017 13:49:04 GMT

hi yuri,

I suggest contacting support for your issue, 4 cores with 4GB for management should work.

Re: Failed to Install R80

Alexander_Bauer — Mon, 20 Mar 2017 15:59:17 GMT

Hi
I have had the same Problem on the Education, after the Change from IE, or Edge to Chrome it was done in 3 minutes.
may be it helps.

Alexander

Re: Failed to Install R80

Vikesh_Ramnath — Tue, 18 Apr 2017 06:51:52 GMT

In my experience installing R80, the First time wizard always hangs on 90%.

The trick is to just wait, it could hang there for at least 30 minutes but it does come around.

Install and leave it come back later it will be completed.

Re: Failed to Install R80

Doug_Engel — Fri, 02 Jun 2017 14:15:09 GMT

I had this issue as well, using both Firefox and IE.

Others are correct, the more horsepower that your guest has, the better. But what solved it for me was to wait until it was around 85% complete, and then close that browser window, then wait another 15 to 30 minutes while it is installing the latest Hotfixes. For me, it seems like it is installing the Hotfixes during that final 10% and it never finishes as long as the window is open.

Your mileage may vary

Re: Failed to Install R80

Mohammed_Jamshe — Tue, 03 Oct 2017 06:47:30 GMT

it had taken 10 hours and didnt completed.

Re: Failed to Install R80

Timothy_Hall — Tue, 03 Oct 2017 12:14:40 GMT

I've noticed during CCSA/CCSE classes that I teach sometimes the browser will never be able to reconnect after the post-install process and reboot is complete, and just appears to sit at 90% forever. Just close the browser and reconnect and you'll find that all is well as long as you have waited 20-30 minutes.

--
My book "Max Power: Check Point Firewall Performance Optimization"
now available via http://maxpowerfirewalls.com.

Re: Failed to Install R80

Norbert_Bohusch — Tue, 03 Oct 2017 14:03:53 GMT

The log for the FirstTimeWizard is /var/log/ftw_install.log

There you should be able to see if it has finished anyway!