topic Reverse proxy not working and still hitting manual NAT rule in Cloud Firewall

Reverse proxy not working and still hitting manual NAT rule

ajsingh — Thu, 11 Jul 2024 20:35:16 GMT

Hi All,

I have a cloudguard HA solution in Azure tenant with R81.10 + 50 Jumbo on it.

I want to configure Reverse proxy on my firewall and was following https://support.checkpoint.com/results/sk/sk110348

Unfortunately i encountered two issues:

1. $CVPNDIR/conf/ReverseProxy_conf/ReverseProxyConf.xml gets reset every time i push configuration with ReverseProxyCLI apply config. Seems like same issue as this :

https://community.checkpoint.com/t5/Remote-Access-VPN/Reverse-Proxy-dest-path/m-p/210485#M10485

2. Traffic is still hitting that manual NAT rule instead of the Reverse proxy Rule that i created . Has anyone encountered this before? I have opened case with TAC but no response yet.

Any suggestion would be helpful here.

Regards

Re: Reverse proxy not working and still hitting manual NAT rule

PhoneBoy — Thu, 11 Jul 2024 22:48:52 GMT

What precise rules are you discussing?
Screenshots (with sensitive details redacted) would be useful.

Not sure you can combine NAT and ReverseProxy (which might be the issue).

Re: Reverse proxy not working and still hitting manual NAT rule

ajsingh — Fri, 12 Jul 2024 15:00:25 GMT

I think I will use Manual NAT rules instead. But thank you everyone for replying. I think so too that its preferring NAT rules over Reverse proxy rules.