topic Re: How to register the vSEC Gateway R77.30 v2 to NSX/ vCenter running GAiA MGMT R80.10? in Cloud Firewall

How to register the vSEC Gateway R77.30 v2 to NSX/ vCenter running GAiA MGMT R80.10?

Jonathan_Olivie — Thu, 11 Jan 2018 14:42:50 GMT

I'm attempting to validate use cases for a CP integeration w/NSX, but the "vsec_config" dose not exist on the CP Management Server(R80.10)... I've installed the "vSEC_Service_Hotfix3_full" patch, but it seems like the documentation does not coincide with the actual implementation. Can anyone point me in the right direction?

Re: How to register the vSEC Gateway R77.30 v2 to NSX/ vCenter running GAiA MGMT R80.10?

PhoneBoy — Thu, 11 Jan 2018 15:17:25 GMT

The fact vsec_config isn't a valid command suggests either the hotfix wasn't installed or the hotfix didn't install properly.

Ensure you downloaded the correct files from here: vSEC Gateway for NSX managed by vSEC Controller

You may need to engage with the TAC for further troubleshooting also: Contact Support | Check Point Software

Re: How to register the vSEC Gateway R77.30 v2 to NSX/ vCenter running GAiA MGMT R80.10?

Arnfinn_Strand — Thu, 11 Jan 2018 15:19:26 GMT

Hi,

You installed the vSEC Service Registration v3 Hotfix on R80.10 Management Serve from section 9 in the:

vSEC Gateway for NSX managed by vSEC Controller

Did you run 'vsec on' and create a Data Center Object in SmartConsole to connect to the NSX Manager or vCenter Server?

And did you then run vsec_config from Expert Mode?

http://dl3.checkpoint.com/paid/d3/d35f70ec96dd61d93a06349023a692f7/CP_R77.30_vSEC_Gateway_v2_for_NSX_Managed_by_R80_vSEC…

Arnfinn