topic Re: Compliance blade on R80.20 and SmartEvent Server in Cloud Firewall

Compliance blade on R80.20 and SmartEvent Server

Everest_Aponte — Tue, 28 Jan 2020 18:37:28 GMT

Hello everyone

First, thank you for your attention

I have the following doubt, in my environment, we have a MGMT Server on R80.20 and SmartEvent the same version and is "Open Server" so, I'm going to enable the Compliance Blade on my MGMT Server and the videos guide I saw that the SmartEvent blades are enabled too.

My question; On an environment using SmartEvent Server must We enable the smartevent blades on the MGMT Server? or only the Compliance blade?

https://community.checkpoint.com/t5/Policy-Management/Compliance-Blade-how-to-videos/td-p/5634

Thank you

Re: Compliance blade on R80.20 and SmartEvent Server

Chris_Atkinson — Wed, 29 Jan 2020 09:05:22 GMT

The example was likely a consolidated installation, Compliance blade should be enabled on the Management Server.

Re: Compliance blade on R80.20 and SmartEvent Server

Everest_Aponte — Wed, 29 Jan 2020 14:10:17 GMT

Hi Chris

Thanks for your response,

I understand that "Compliance Blade" must enable on the MGMT Server in fact on the SmartEven Server cannot enable.

In this sense, if in my environment have a SmartEvent Server with the "Smart Event Server and Correlation Unit" blades enabled, Should I enabled "Smart Event Server and Correlation Unit" blades on the MGMT Server too?

Thank you so much!

Re: Compliance blade on R80.20 and SmartEvent Server

Chris_Atkinson — Wed, 29 Jan 2020 14:17:33 GMT

If you have a distributed configuration SmartEvent need not be enabled also on the Management object.

Re: Compliance blade on R80.20 and SmartEvent Server

Everest_Aponte — Wed, 29 Jan 2020 19:45:59 GMT

Hello Chris

Ready! thank you so much

Best regards