topic Interface stats script in Scripts

topic Interface stats script in Scripts https://community.checkpoint.com/t5/Scripts/Interface-stats-script/m-p/268738#M1396 Hey guys, This script provided full report on all interfaces statistics from expert mode. dos2unix + chmod needed. Lab example: [Expert@CP-GW:0]# ./cp_ifstats.sh ERROR: choose -a or -i "iface1 iface2" Usage: cp_ifstats.sh [-a] [-i "eth0 bond0 vlan10"] [-n ITER] [-t SEC] [-q] Options: -a All non-loopback interfaces (auto-discover) -i "list" Space-separated list of interfaces to inspect -n ITER Number of iterations (default: 1) -t SEC Interval seconds between iterations (default: 5) -q Quiet (no colors) Examples: cp_ifstats.sh -a cp_ifstats.sh -i "eth0 bond0" -n 5 -t 2 [Expert@CP-GW:0]# ./cp_ifstats.sh -a ========== 2026-01-27 07:50:15 :: Interface Report ========== Interfaces: eth0 eth1 eth2 gre0 gretap0 erspan0 eth2.100 Iteration: 1/1 ==================== eth0 ==================== -- ip(8) summary: eth0 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000 link/ether 50:01:00:06:00:00 brd ff:ff:ff:ff:ff:ff promiscuity 0 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000 link/ether 50:01:00:06:00:00 brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped overrun mcast 11959054164 54072730 0 0 0 0 TX: bytes packets errors dropped carrier collsns 4734487978 51841095 0 0 0 0 -- /proc/net/dev counters: eth0 RX bytes=11959054224 packets=54072731 errs=0 drop=0 fifo=0 frame=0 TX bytes=4734488748 packets=51841098 errs=0 drop=0 fifo=0 colls=0 carrier=0 -- ethtool link details: eth0 Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Link detected: yes driver: vmxnet3 version: 1.6.0.0-k-NAPI firmware-version: expansion-rom-version: bus-info: 0000:00:03.0 -- ethtool -S (non-zero error-ish counters): eth0 (no non-zero error counters found, or driver does not expose them) -- recent kernel messages (link flaps/errors) for: eth0 [313928.830878] vmxnet3 0000:00:03.0 eth0: NIC Link is Up 1000 Mbps [313930.933141] vmxnet3 0000:00:03.0 eth0: NIC Link is Up 1000 Mbps [313933.035386] vmxnet3 0000:00:03.0 eth0: NIC Link is Up 1000 Mbps [313935.137780] vmxnet3 0000:00:03.0 eth0: NIC Link is Up 1000 Mbps [313937.240934] vmxnet3 0000:00:03.0 eth0: NIC Link is Up 1000 Mbps [313939.342441] vmxnet3 0000:00:03.0 eth0: NIC Link is Up 1000 Mbps [313941.444331] vmxnet3 0000:00:03.0 eth0: NIC Link is Up 1000 Mbps [313943.546552] vmxnet3 0000:00:03.0 eth0: NIC Link is Up 1000 Mbps [313945.649475] vmxnet3 0000:00:03.0 eth0: NIC Link is Up 1000 Mbps [313947.751204] vmxnet3 0000:00:03.0 eth0: NIC Link is Up 1000 Mbps [313949.853522] vmxnet3 0000:00:03.0 eth0: NIC Link is Up 1000 Mbps [313951.955238] vmxnet3 0000:00:03.0 eth0: NIC Link is Up 1000 Mbps [313954.057501] vmxnet3 0000:00:03.0 eth0: NIC Link is Up 1000 Mbps [313956.158985] vmxnet3 0000:00:03.0 eth0: NIC Link is Up 1000 Mbps [313958.261421] vmxnet3 0000:00:03.0 eth0: NIC Link is Up 1000 Mbps [313960.364487] vmxnet3 0000:00:03.0 eth0: NIC Link is Up 1000 Mbps [313962.466707] vmxnet3 0000:00:03.0 eth0: NIC Link is Up 1000 Mbps [313964.568034] vmxnet3 0000:00:03.0 eth0: NIC Link is Up 1000 Mbps [313966.671221] vmxnet3 0000:00:03.0 eth0: NIC Link is Up 1000 Mbps [313968.773155] vmxnet3 0000:00:03.0 eth0: NIC Link is Up 1000 Mbps ==================== eth1 ==================== -- ip(8) summary: eth1 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000 link/ether 50:01:00:06:00:01 brd ff:ff:ff:ff:ff:ff promiscuity 0 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000 link/ether 50:01:00:06:00:01 brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped overrun mcast 129422640 1426996 0 0 0 0 TX: bytes packets errors dropped carrier collsns 0 0 0 0 0 0 -- /proc/net/dev counters: eth1 RX bytes=129422640 packets=1426996 errs=0 drop=0 fifo=0 frame=0 TX bytes=0 packets=0 errs=0 drop=0 fifo=0 colls=0 carrier=0 -- ethtool link details: eth1 Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Link detected: yes driver: vmxnet3 version: 1.6.0.0-k-NAPI firmware-version: expansion-rom-version: bus-info: 0000:00:04.0 -- ethtool -S (non-zero error-ish counters): eth1 (no non-zero error counters found, or driver does not expose them) -- recent kernel messages (link flaps/errors) for: eth1 [313927.829984] vmxnet3 0000:00:04.0 eth1: NIC Link is Up 1000 Mbps [313929.932666] vmxnet3 0000:00:04.0 eth1: NIC Link is Up 1000 Mbps [313932.034575] vmxnet3 0000:00:04.0 eth1: NIC Link is Up 1000 Mbps [313934.136847] vmxnet3 0000:00:04.0 eth1: NIC Link is Up 1000 Mbps [313936.239288] vmxnet3 0000:00:04.0 eth1: NIC Link is Up 1000 Mbps [313938.340978] vmxnet3 0000:00:04.0 eth1: NIC Link is Up 1000 Mbps [313940.443600] vmxnet3 0000:00:04.0 eth1: NIC Link is Up 1000 Mbps [313942.546856] vmxnet3 0000:00:04.0 eth1: NIC Link is Up 1000 Mbps [313944.647403] vmxnet3 0000:00:04.0 eth1: NIC Link is Up 1000 Mbps [313946.749641] vmxnet3 0000:00:04.0 eth1: NIC Link is Up 1000 Mbps [313948.851802] vmxnet3 0000:00:04.0 eth1: NIC Link is Up 1000 Mbps [313950.953956] vmxnet3 0000:00:04.0 eth1: NIC Link is Up 1000 Mbps [313953.056229] vmxnet3 0000:00:04.0 eth1: NIC Link is Up 1000 Mbps [313955.158571] vmxnet3 0000:00:04.0 eth1: NIC Link is Up 1000 Mbps [313957.260576] vmxnet3 0000:00:04.0 eth1: NIC Link is Up 1000 Mbps [313959.362635] vmxnet3 0000:00:04.0 eth1: NIC Link is Up 1000 Mbps [313961.464790] vmxnet3 0000:00:04.0 eth1: NIC Link is Up 1000 Mbps [313963.567394] vmxnet3 0000:00:04.0 eth1: NIC Link is Up 1000 Mbps [313965.670382] vmxnet3 0000:00:04.0 eth1: NIC Link is Up 1000 Mbps [313967.771289] vmxnet3 0000:00:04.0 eth1: NIC Link is Up 1000 Mbps ==================== eth2 ==================== -- ip(8) summary: eth2 4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000 link/ether 50:01:00:06:00:02 brd ff:ff:ff:ff:ff:ff promiscuity 0 4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000 link/ether 50:01:00:06:00:02 brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped overrun mcast 129422640 1426996 0 0 0 0 TX: bytes packets errors dropped carrier collsns 0 0 0 0 0 0 -- /proc/net/dev counters: eth2 RX bytes=129422640 packets=1426996 errs=0 drop=0 fifo=0 frame=0 TX bytes=0 packets=0 errs=0 drop=0 fifo=0 colls=0 carrier=0 -- ethtool link details: eth2 Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Link detected: yes driver: vmxnet3 version: 1.6.0.0-k-NAPI firmware-version: expansion-rom-version: bus-info: 0000:00:05.0 -- ethtool -S (non-zero error-ish counters): eth2 (no non-zero error counters found, or driver does not expose them) -- recent kernel messages (link flaps/errors) for: eth2 [313927.430346] vmxnet3 0000:00:05.0 eth2: NIC Link is Up 1000 Mbps [313929.531941] vmxnet3 0000:00:05.0 eth2: NIC Link is Up 1000 Mbps [313931.634020] vmxnet3 0000:00:05.0 eth2: NIC Link is Up 1000 Mbps [313933.737461] vmxnet3 0000:00:05.0 eth2: NIC Link is Up 1000 Mbps [313935.838815] vmxnet3 0000:00:05.0 eth2: NIC Link is Up 1000 Mbps [313937.941393] vmxnet3 0000:00:05.0 eth2: NIC Link is Up 1000 Mbps [313940.044080] vmxnet3 0000:00:05.0 eth2: NIC Link is Up 1000 Mbps [313942.145599] vmxnet3 0000:00:05.0 eth2: NIC Link is Up 1000 Mbps [313944.247109] vmxnet3 0000:00:05.0 eth2: NIC Link is Up 1000 Mbps [313946.349580] vmxnet3 0000:00:05.0 eth2: NIC Link is Up 1000 Mbps [313948.451092] vmxnet3 0000:00:05.0 eth2: NIC Link is Up 1000 Mbps [313950.554266] vmxnet3 0000:00:05.0 eth2: NIC Link is Up 1000 Mbps [313952.656144] vmxnet3 0000:00:05.0 eth2: NIC Link is Up 1000 Mbps [313954.758189] vmxnet3 0000:00:05.0 eth2: NIC Link is Up 1000 Mbps [313956.860195] vmxnet3 0000:00:05.0 eth2: NIC Link is Up 1000 Mbps [313958.962353] vmxnet3 0000:00:05.0 eth2: NIC Link is Up 1000 Mbps [313961.064441] vmxnet3 0000:00:05.0 eth2: NIC Link is Up 1000 Mbps [313963.166861] vmxnet3 0000:00:05.0 eth2: NIC Link is Up 1000 Mbps [313965.269803] vmxnet3 0000:00:05.0 eth2: NIC Link is Up 1000 Mbps [313967.371881] vmxnet3 0000:00:05.0 eth2: NIC Link is Up 1000 Mbps ==================== gre0 ==================== -- ip(8) summary: gre0 5: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN mode DEFAULT qlen 1000 link/gre 0.0.0.0 brd 0.0.0.0 promiscuity 0 gre remote any local any ttl inherit nopmtudisc 5: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN mode DEFAULT qlen 1000 link/gre 0.0.0.0 brd 0.0.0.0 RX: bytes packets errors dropped overrun mcast 0 0 0 0 0 0 TX: bytes packets errors dropped carrier collsns 0 0 0 0 0 0 -- /proc/net/dev counters: gre0 RX bytes=0 packets=0 errs=0 drop=0 fifo=0 frame=0 TX bytes=0 packets=0 errs=0 drop=0 fifo=0 colls=0 carrier=0 -- ethtool link details: gre0 (ethtool not supported on gre0) -- recent kernel messages (link flaps/errors) for: gre0 (no matching recent messages) ==================== gretap0 ==================== -- ip(8) summary: gretap0 6: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff promiscuity 0 gretap remote any local any ttl inherit nopmtudisc 6: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped overrun mcast 0 0 0 0 0 0 TX: bytes packets errors dropped carrier collsns 0 0 0 0 0 0 -- /proc/net/dev counters: gretap0 RX bytes=0 packets=0 errs=0 drop=0 fifo=0 frame=0 TX bytes=0 packets=0 errs=0 drop=0 fifo=0 colls=0 carrier=0 -- ethtool link details: gretap0 (ethtool not supported on gretap0) -- recent kernel messages (link flaps/errors) for: gretap0 (no matching recent messages) ==================== erspan0 ==================== -- ip(8) summary: erspan0 7: erspan0@NONE: <BROADCAST,MULTICAST> mtu 1450 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff promiscuity 0 erspan 7: erspan0@NONE: <BROADCAST,MULTICAST> mtu 1450 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped overrun mcast 0 0 0 0 0 0 TX: bytes packets errors dropped carrier collsns 0 0 0 0 0 0 -- /proc/net/dev counters: erspan0 RX bytes=0 packets=0 errs=0 drop=0 fifo=0 frame=0 TX bytes=0 packets=0 errs=0 drop=0 fifo=0 colls=0 carrier=0 -- ethtool link details: erspan0 (ethtool not supported on erspan0) -- recent kernel messages (link flaps/errors) for: erspan0 (no matching recent messages) ==================== eth2.100 ==================== -- ip(8) summary: eth2.100 8: eth2.100@eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT qlen 1000 link/ether 50:01:00:06:00:02 brd ff:ff:ff:ff:ff:ff promiscuity 0 vlan protocol 802.1Q id 100 <REORDER_HDR> 8: eth2.100@eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT qlen 1000 link/ether 50:01:00:06:00:02 brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped overrun mcast 0 0 0 0 0 0 TX: bytes packets errors dropped carrier collsns 0 0 0 0 0 0 -- /proc/net/dev counters: eth2.100 RX bytes=0 packets=0 errs=0 drop=0 fifo=0 frame=0 TX bytes=0 packets=0 errs=0 drop=0 fifo=0 colls=0 carrier=0 -- ethtool link details: eth2.100 Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Link detected: yes driver: 802.1Q VLAN Support version: 1.8 firmware-version: N/A expansion-rom-version: bus-info: -- ethtool -S (non-zero error-ish counters): eth2.100 (no non-zero error counters found, or driver does not expose them) (ethtool -S not supported on eth2.100) -- recent kernel messages (link flaps/errors) for: eth2.100 (no matching recent messages) [Expert@CP-GW:0]# Tue, 27 Jan 2026 15:02:03 GMT the_rock 2026-01-27T15:02:03Z Interface stats script https://community.checkpoint.com/t5/Scripts/Interface-stats-script/m-p/268738#M1396 1 Tue, 27 Jan 2026 15:02:03 GMT https://community.checkpoint.com/t5/Scripts/Interface-stats-script/m-p/268738#M1396 the_rock 2026-01-27T15:02:03Z