topic Re: Exporting/Importing R77.x and Earlier Configuration (odumper and ofiller) in Scripts

Odumper and Ofiller (Exporting/Importing R5x-R7x Config)

PhoneBoy — Tue, 10 Feb 2026 13:18:24 GMT

133

Re: Exporting/Importing R77.x and Earlier Configuration (odumper and ofiller)

lucascaetano9 — Wed, 08 May 2019 17:25:11 GMT

I would like your help to know if there is a newest version of this? I am running the odumper command in CMD to convert the file to .CSV and getting the issue "cannot start odumper or run due to incomaptibility with 64-bit versions of windows. Please contact the software vendor to ask if a 64-bit windows compatible version is available."

I am using the 2.4 where the last update is 2006.

Re: Exporting/Importing R77.x and Earlier Configuration (odumper and ofiller)

PhoneBoy — Thu, 09 May 2019 01:02:49 GMT

Yes, these are the latest version of these tools.
While they were developed by a now former Check Point employee, they are not now nor have they ever been official Check Point tools.
As such, they are provided as-is and there are no plans for further enhancements or recompiles for more modern operating systems.

Another option that runs in PERL is: https://github.com/mattburch/CPParser
It does not have a CSV export/import function natively, but it does appear to export the necessary dbedit commands to recreate the object.

Re: Exporting/Importing R77.x and Earlier Configuration (odumper and ofiller)

Vladimir — Thu, 09 May 2019 03:15:28 GMT

Happy to see you bringing these up, just recently had to point them out to one of my buddies.

Also, no luck running them in 64 bit Windows.

Re: Exporting/Importing R77.x and Earlier Configuration (odumper and ofiller)

PhoneBoy — Thu, 09 May 2019 06:18:45 GMT

I linked to an external version of them more than once.
Also used to host this on phoneboy.com, so it seemed appropriate. 😁

Re: Exporting/Importing R77.x and Earlier Configuration (odumper and ofiller)

dannyclee — Tue, 27 Aug 2019 21:00:46 GMT

Thank you!

Re: Exporting/Importing R77.x and Earlier Configuration (odumper and ofiller)

JozkoMrkvicka — Tue, 27 Aug 2019 22:44:14 GMT

While 64bit versions of Windows are not supported, you can still run these tools on any Linux machine (even on Check Point Management).

Just move folder "Linux_and_SPLAT" from archive to the machine. Run following command on all .lin files inside this folder:

chmod +x *.lin

and after that you can run both tools by running the following commands:

./odumper.lin ./ofiller.lin

Output from my R77.30 MDS:

[Expert@MDS:0]# ./odumper.lin
Unofficial/Unsupported Object Dumper v2.4 - Developed by Martin Hoz
(c) 2003-2006 by Check Point Software Technologies, Inc.
===============================================================================

*** WARNING!: Missing at least a required parameter: (-f) Input (objects) file
or (-p) Input (rules) file.

*** WARNING!: Missing a required parameter: (-o) Output file.

This program takes an Objects_5_0.C or rulebases_5_0.C file, and writes a
formatted CSV file (spreadsheet) that contains the objects you have on the
objects database and/or the rules you have on your rulebases.
You may open later this file with Microsoft Excel or any other alike
spreadsheet program.

Program syntax:
1) odumper.lin help (prints help pages)
2) odumper.lin -I (Interactive mode)
3) odumper.lin [-f file | -p file] -o file [-d] [-html] [-v]

-f specifies the path to the objects (Objects_5_0.C or objects.C)
file you want to process
-p specifies the path to the rulebases (rulebases_5_0.fws) file
you want to process
-o specified the path to the output formatted file you want to have
-d tells the program to also print the default objects - Optional
-html formats the output to HTML (instead of default CSV format) - Optional
-v activates verbose mode
file is a valid filename - such as output.txt, output.html or objects.C

Required parameters: (-f and/or -p) and -o

===============================================================================
No valid objects were processed! - Thank you for using Object Dumper v2.4!

[Expert@MDS:0]# ./ofiller.lin
Unofficial/Unsupported Object Filler v2.4 - Developed by Martin Hoz
(c) 2003-2006 by Check Point Software Technologies, Inc.
===============================================================================
Missing Object type specification (-t)
Missing Initial IP (-s)
Missing Final (Ending) IP (-d)
Missing Mask length (-m)
Missing Output file (-o|-a)

*** WARNING!: Missing at least 1 required parameter. Please verify the syntax
and try again...

This program helps you populate your Check Point SmartCenter server by
producing CLI commands you can directly execute using DBedit in batch mode.

Program syntax:
1) ofiller.lin help (prints help pages - with examples)
2) ofiller.lin -I (Interactive mode)
3) ofiller.lin -f file -i input [-o|-a] file [-c color] [-t type]
[-p policy] [-nopv] [-nonat] [-v]
4) ofiller.lin -t type -s ip -d ip -m mask [-c color]
[-n ip | -ns ip -nd ip -nm mask] [-b obj] [-o|-a] file [-v]

Where valid (case sensitive in all cases) switches input examples are:
file is a valid filename - such as myfile.csv or output.txt
policy is a valid imported policy name - such as imp_pol or my_policy
input is the type of input configuration - csv, list, hosts, pix, netscreen,
gauntlet, sidewinder, raptor, ciscorouter
ip is a valid IP number - such as 192.168.10.45
type can be either host, plaingw, net, range, cpgw, ss, idevice, ose
ledge, lip40
mask is the mask length in bits. A number between 8 and 30
color can be black, blue, green, red, brown or others (see help)
obj it's an existing Check Point gateway object, for NAT purposes

Required parameters: (-f, -i and [-o|-a]) or (-t, -s, -d, -m and [-o|-a])

===============================================================================
No valid objects were processed! - Thank you for using Object Filler v2.4!

PS: Coredumps are created once the tools are run from the management:

[Expert@MDS:0]# ./odumper.lin -p /opt/CPmds-R77/customers/cma_imported/CPsuite-R77/fw1/conf/rulebases_5_0.fws -o /home/admin/imported.csv
Unofficial/Unsupported Object Dumper v2.4 - Developed by Martin Hoz
(c) 2003-2006 by Check Point Software Technologies, Inc.
===============================================================================

===============================================================================
* Processing rules...
-------------------------------------------------------------------------------
.....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

===============================================================================
Processed 460444 possible objects and found 3246 valid ones.
It took 6.0 seconds on quiet mode.
===============================================================================

*******************************************************************************
Wow! That's a big amount of objects! - Have you considered helping to make
Object Dumper better? - Please do! - Read Questions 1.11, 1.12, 1.13 and 2.6 in
the FAQ Section of the User's Manual to find out how you can help!!!
*******************************************************************************

-------------------------------------------------------------------------------
Total successfully processed Rules = 3246
===============================================================================
Task done successfully! - Thank you for using Object Dumper v2.4!
Segmentation fault (core dumped)

Re: Exporting/Importing R77.x and Earlier Configuration (odumper and ofiller)

dannyclee — Wed, 28 Aug 2019 14:53:54 GMT

First thanks so much for the info, but I am not a Linux guy and SCARED TO DEATH to run this on our PROD Checkpoint Box. Is there a simpler way to extract the config from the Checkpoint either via command line or the management server?

Re: Exporting/Importing R77.x and Earlier Configuration (odumper and ofiller)

dannyclee — Wed, 28 Aug 2019 14:54:48 GMT

Thank you sir.

Re: Exporting/Importing R77.x and Earlier Configuration (odumper and ofiller)

dannyclee — Wed, 28 Aug 2019 18:03:33 GMT

In the GUI is there anyway to copy multiple objects out into notepad\word? I can only seem to double click on one object then go up to the top copy\paste. I have firewall rules with several objects in one rule and don't want to copy\paste one at a time?

Re: Exporting/Importing R77.x and Earlier Configuration (odumper and ofiller)

JozkoMrkvicka — Wed, 28 Aug 2019 20:48:53 GMT

You can run this tool on ANY Linux machine, not specifically related to Check Point.

Re: Exporting/Importing R77.x and Earlier Configuration (odumper and ofiller)

PhoneBoy — Tue, 03 Sep 2019 15:59:51 GMT

You can copy the two files (objects_5_0.C and rulebases_5_0.fws) from your production management server (both in $FWDIR/conf) and run the tools from a Linux machine.

Re: Exporting/Importing R77.x and Earlier Configuration (odumper and ofiller)

tech_scrw — Thu, 06 Feb 2020 14:20:21 GMT

Hi all,

I need your help about an error message when I run the command: odumper -f objects_5_0.C -o myobjects.csv

The objects_5_0.C is exported from Management Server in R77.30. When I run odumper -p rulebases_5_0.fws -o rules.csv => no error and the CSV file is successfuly created.

The error message:

---------------------------------------------------------------------------------------------------------------------------

./odumper.lin -f objects_5_0.C -o myobjects.csv
Unofficial/Unsupported Object Dumper v2.4 - Developed by Martin Hoz
(c) 2003-2006 by Check Point Software Technologies, Inc.
===============================================================================

===============================================================================
* Processing objects...
-------------------------------------------------------------------------------
..........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................*** WARNING!!!: An internal error condition regarding the number of words was detected!
The number of currently detected words is -216-
The number of predefined words is -140- Aborting!!!

---------------------------------------------------------------------------------------------------------------------------

Anybody have an idea?

Many thanks in advance and at your disposal for any further informations.

Regards,

Thomas

Re: Exporting/Importing R77.x and Earlier Configuration (odumper and ofiller)

G_W_Albrecht — Fri, 23 Oct 2020 08:10:15 GMT

You would use this for R55 or R65 export - but for R77.30 ??? You have better tools for that, as this is R65 !

Re: Exporting/Importing R77.x and Earlier Configuration (odumper and ofiller)

Jeff_Gao — Fri, 23 Oct 2020 14:19:57 GMT

This is a good tools,checkpoint should maintain as a official tools.

Re: Exporting/Importing R77.x and Earlier Configuration (odumper and ofiller)

PhoneBoy — Fri, 23 Oct 2020 15:46:30 GMT

Not sure why we would do that now given that R77.x and earlier is End of Support and these tools are only relevant on those releases.

Re: Exporting/Importing R77.x and Earlier Configuration (odumper and ofiller)

PhoneBoy — Fri, 23 Oct 2020 15:53:39 GMT

These tools focus on basic object/access policy definition.
This did not change substantially between R55 and R77.30, so these tools will still be applicable.
Configurations beyond basic firewall will need to be migrated manually.