Number of Users currently connected to SMB via RA VPN client

Document created by Günther W. Albrecht on Mar 23, 2018
Version 1Show Document
  • View in full screen mode

The sk102803 explains how you can see the number of users currently connected via Client-to-Site VPN on CLI of a Locally Managed 600/700/1100/1200R/1400 appliances.


  1. Connect over SSH to the Locally Managed appliance and log in to Expert mode.
  2. Run the following command:


# pep show user all


This will display a table containing all users which are currently connected with their corresponding IP addresses (in Hexadecimal format).